Bosch 3.5 사용자 설명서
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 4 | Amplifiers
en | 193
For a correct operation of the supervision, it is
important that the loudspeaker line has the
characteristics that are listed in section 12.6.5. Also, the
minimum total loudspeaker impedance at 70 kHz is
important. This impedance depends on the quality of
the transformer in the loudspeaker and the number of
loudspeakers in the line. The loudspeakers of Bosch
Security Systems are designed with this impedance
criterion in mind.
The power rating for any loudspeaker that is used with
the loudspeaker supervision must be between 0.75 W
and 60 W.
important that the loudspeaker line has the
characteristics that are listed in section 12.6.5. Also, the
minimum total loudspeaker impedance at 70 kHz is
important. This impedance depends on the quality of
the transformer in the loudspeaker and the number of
loudspeakers in the line. The loudspeakers of Bosch
Security Systems are designed with this impedance
criterion in mind.
The power rating for any loudspeaker that is used with
the loudspeaker supervision must be between 0.75 W
and 60 W.
Proceed as follows to install the loudspeaker supervision
board in a loudspeaker:
board in a loudspeaker:
1 Set the address of the board with the S700 and S701
address selectors (see section 12.4).
2 Use the corner holes in the board (see figure 12.5) to
install it in a loudspeaker. The coils on the PCB must
be kept at a distance of 30 mm or more from the
loudspeaker magnet and a distance of 50 mm or
more from the loudspeaker transformer, otherwise
the magnetic fields can disturb the correct operation
of the board.
be kept at a distance of 30 mm or more from the
loudspeaker magnet and a distance of 50 mm or
more from the loudspeaker transformer, otherwise
the magnetic fields can disturb the correct operation
of the board.
table 12.1: Loudspeakers that have a provision for
installing a supervision board
Speaker type
Provision for
mounting
Pre-wired, no
provision for
mounting
Ceiling speakers
LC1-WM06E
LC1-UM06E
LC1-UM12E
LC1-UM24E
LBC 3510/40
LBC 3520/40
LBC 3530/40
9
9
9
9
9
9
9
9
9
9
9
9
9
Cabinets
LBC 3011/41
LBC 3011/51
LB1-UM06E
LBC 3018/00
9
9
9
9
9
9
9
Columns
LBC 3210/00
LA1-UM20E
LA1-UM40E
9
9
9
9
9
Horns/Drivers
LBC 3403/16
LBC 3404/16
LBC 3405/16
LBC 3406/16
LH1-10M10E
LBC 3482/00
LBC 3483/00
LBC 3484/00
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
Sound projectors
LP1-BC10E
LP1-UC10E
LP1-UC20E
LBC 3432/01
LS1-OC100E
9
9
9
9
9
9
9
9
Note
The installer shall only use EN54-24 compliant
The installer shall only use EN54-24 compliant
loudspeakers for emergency sound systems in
Europe.
Note
See the installation instructions of the
See the installation instructions of the
loudspeakers for more information.
Note
To install the board in, for example, a box, use
To install the board in, for example, a box, use
the universal brackets (LBB4446/00). Connect
the board to a bracket using the middle holes
(see figure 12.5).