Phantom Tech SU0508L 사용자 설명서

Installing the 

Bottom Rail 

If the Bottom Rail did not require cutting, it 
is important to select the correct Bottom Rail 
for installation. The Sure View Screen  
package comes with two Bottom Rails to 
accommodate both flat and angled door sill. 
Please refer to (A) to determine the correct 
Bottom Rail.
1.   Remove the backing on the adhesive strip  
 

on the Bottom Rail.

2.   While slightly lifting the Sliding Bar, 

 

 

insert one end of the Bottom Rail 

 

 

into the groove at the bottom of  

 

 

the Sliding Bar Bottom Cap. (B)

14

3.   Position the other end so that    
 

the center of the Catch Frame    

 

aligns with the center of  

 

 

the Bottom Rail. (C) When  

 

 

aligned, press the Bottom Rail    

 

firmly onto the door sill.

4.   Fasten the Bottom Rail to the    
 

door sill using the 5/8” (16 mm)  

 

Self-Tapping Screws provided.   

 

It is not necessary to pre-drill the  

 

surface below.

NOTE: If using the Angled Bottom Rail, ensure  

 

that it is oriented so that the top of the Bottom Rail    
is flat and level when placed on the door sill.

Bottom 

Rail

Bottom 

Rail

Sliding

Bar

Screen Housing

Bottom Rail

Align The 

Centre

Catch

Frame

5/8” (16 mm)

Self Tapping

Screw

Bottom Rail Type “B”

Angled Surface

Bottom Rail Type “A”

Flat Surface