DKS Enterprises 9220 사용자 설명서
1.2 Mounting
Options
The 9210, 9220 and 9230 vehicular gate operators are designed to be mounted on the optional
mounting stand (p/n 9200-135) or directly to a concrete pad. The mounting stand option is
recommended if the gate length exceeds 30 feet since this mounting method will allow a “chain rest”
to be mounted on the gate.
mounting stand (p/n 9200-135) or directly to a concrete pad. The mounting stand option is
recommended if the gate length exceeds 30 feet since this mounting method will allow a “chain rest”
to be mounted on the gate.
Pad mounting is typically
used with gates that are less
than 30 feet in length.
used with gates that are less
than 30 feet in length.
Requires use of the pad
mounting plate that is
included with the operator.
mounting plate that is
included with the operator.
Pedestal mounting is
typically used with gates that
are greater than 30 feet in
length since this method
allows a chain rest to be
installed on the gate.
typically used with gates that
are greater than 30 feet in
length since this method
allows a chain rest to be
installed on the gate.
Requires use of the pad
mounting plate that is
included with the operator.
mounting plate that is
included with the operator.
Requires use of the
OPTIONAL operator
mounting stand.
OPTIONAL operator
mounting stand.
Page
16
9210-065-H-8-08