Heath Zenith 595-5684-09 사용자 설명서

다운로드
페이지 24
-3-
595-5684-09
Your wireless chime has different selectable tunes:
Ding (one note), Ding-Dong 
(two note), or
Westminster (eight note) (Available on selected chimes). The 
factory setting is for the Ding-Dong tune (or Westminster, when available). This
tune can be changed by following the instructions below.
Ding (one note tune) 
 Inside Push Button: Add a jumper to location 8.
Ding-Dong (two note tune)
 Inside Push Button: Remove jumper from location 8.
  Chime: Remove jumper from location 8.
Westminster (Eight note tune) (Available on selected chimes)
 Inside Push Button: Remove jumper from location 8.
  Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. We recommend
the back door use the 
Ding tune and the front door use the Ding-Dong tune 
(or 
Westminster tune, available on selected chimes). Models that include two
push buttons will come factory set for front and back doors. Decals on the rear
of the push button will indicate its setting.
Note:  Some  models  might  require  the  use  of 
tweezers to remove and replace the jumpers.
Figure 4
1
 2
 3
 4
 5
 6
 7
 8
Inside Push
Button
Tune Setting
12345678
Remove screw to
open access door
Back of Chime
Tune Setting 
(Not used on all 
models)
WARNING:  Disconnect  chime  unit  from  power  source  before
opening  code  access  door.  Close  door  and  replace  screw  before
reconnecting to power.
Tune Settings