Casablanca Fan Company 55019 사용자 설명서

www.CasablancaFanCo.com

1.888.227.2178

•  Press a fan speed button (1-4).

•  Check the circuit breaker to 

ensure the power is turned on.

•  Check the wall control battery.

•  Make sure the blades spin freely.

•  Turn off power from the circuit 

breaker, then loosen the canopy 
and check all the connections 
according to the wiring diagram 
on pages 10-11.

•  Check the plug connection in 

the switch housing.

•  Tighten all of the blade and 

blade iron screws until they 
are snug.

•  Turn the power off, support 

the fan carefully, and check 
that the hanger ball is 
properly seated.

•  Use the provided balancing 

kit and instructions to balance 
the fan.

•  Tighten the blade and blade 

iron screws until they are snug.

•  Check to see if any of the 

blades are cracked. If so, replace 
all of the blades.

•  Make sure the battery is installed 

correctly.

•  Install a new battery.

•  If the remote still does not 

work, you may need to pair 
your remote. To prevent faulty 
operation, please disconnect 
power (at the wall switch, 
breaker, or fan) from all other 
ceiling fans within range while 
pairing. To pair: cycle power 
to the fan by turning power off 
and back on at the wall switch 
(or circuit breaker if necessary). 
Within three minutes, press and 
hold both the Fan Off button and 
the 4 button for four seconds to 
pair the remote. If applicable, the 
fan will turn on and the lights 
will flash and stay on to indicate 
successful pairing.

For the most updated list of 
Casablanca Authorized Service 
Centers, visit 
www.CasablancaFanCo.com or 
call toll free 1-888-227-2178.

M6011-01 • 04/16/15 • © 2012–2015 Casablanca Fan Company