Casablanca Fan Company 4726D 사용자 설명서

Pull-chain switches on the fan control the fan and reverse. 
Using the fan control pull-chain switch: Fan off at start.

First pull: fan ON, low speed
Second pull: medium speed
Third pull: high speed
Fourth pull: fan OFF

Direction of blade rotation is controlled by the reverse 
pull-chain on the side of the switch housing. No changes 
in household wiring are required.

NOTE: If a separate circuit is used to control the lights from a 
wall control, the BLUE D1-Option wire in the canopy should be 
connected to that switch leg with the BLACK fan power wire.

1.  Refer to light kit instructions to assemble and attach your 

light kit correctly.

2.  Remove the two 8-32 screws from the switch housing cap.

3.  Remove the plug from switch housing.

4.  Install pull-chain switch and finger tighten collar on 

switch.

5.  Connect one wire from pull-chain switch to the BLUE D1-

Option wire. Secure splice with a wire nut.

6.  Connect other wire from pull-chain switch to BLACK wire 

from light kit. Secure splice with a wire nut.

7.  Connect WHITE wire from switch housing to WHITE wire 

from the light kit. Secure splice with a wire nut.

8.  At the canopy, connect the BLACK and BLUE wires.

Fan Speed

Airfl ow 

(CFM)*

Power Use 

(watts)

Airfl ow Effi ciency (CFM/

watt)

Low

1864

10

185

Med

4117

33

125

High

7126

82

87

* Measured according to the ENERGY STAR

®

-approved Solid State test method.

Ceiling fan airfl ow is measured in cubic feet per minute (CFM). Power use is measured in 
watts. To maximize energy savings, 

•  Choose a fan with high airfl ow effi ciency (CFM/watt).

• Use 

ENERGY 

STAR

®

-labeled lighting in your fan.

•  Remember to switch off your fan when you leave the room.