Gianni Industries GS-200 전단
Statement
Specifications
GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-GS-200 Ver. C Published on 2008.05.14
DM-CA-GS-200 Ver. C Published on 2008.05.14
The products are manufactured under an ISO
9 0 0 1
9 0 0 1
Q C
0 8 0 0 0 0
C e r t i f i e d
Q u a l i t y
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
product quality, performance and commitment
to customer satisfaction.
&
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Flush Installation
GS-200 MINI SHEAR LOCK
GEM Mini Shear Lock locks by seating two conical locking
bolts located on opposite corners of the Armature Plate into
matching keep holes on each end of the Electromagnet body.
The GEM Shear Locks never bind under pressure, are not
sensitive to door alignment, and do not require door position
sensing or auxiliary timing circuitry. They are ideal for swing-
through doors and sliding doors as well. A unique benefit of
the GEM Shear Locks' physical design is that they function
equally well on doors that swing to close or doors that slide to
close.
matching keep holes on each end of the Electromagnet body.
The GEM Shear Locks never bind under pressure, are not
sensitive to door alignment, and do not require door position
sensing or auxiliary timing circuitry. They are ideal for swing-
through doors and sliding doors as well. A unique benefit of
the GEM Shear Locks' physical design is that they function
equally well on doors that swing to close or doors that slide to
close.
The GS-200 series is available in two models, GS-200
Unmonitored or the GS-200M with hall effect monitoring. The
units are design for use with metal door frame, fitted to either,
wooden, aluminum, or glass doors with the assistance of
various housings. This manual gives a guide to all of the above
applications and other useful installation information.
units are design for use with metal door frame, fitted to either,
wooden, aluminum, or glass doors with the assistance of
various housings. This manual gives a guide to all of the above
applications and other useful installation information.
The GS-200 provide up to 1200 pounds shearing force and
fully concealed mounting, combine the best in failsafe
performance with the most advanced features.
performance with the most advanced features.
30
33
(43)
27
180
180
164
164
30
Unit: mm
Dimension
Magnet
Armature
(Power Off)
Magnet
Armature
(On Power)
Unique Anti-Residual design
When there is no power, there will be no holding force, and
the push-off button will pop out immediately, to release the
Electromagnetic Lock and the Armature Plate for no residual
magnetism.
Electromagnetic Lock and the Armature Plate for no residual
magnetism.
Voltage Tolerance: 10%
Current Draw: 420mA@12 VDC; 210mA@24 VDC
)at temperature 20 C(
Magnetic bond sensor monitor output (GS-200M)
(SPDT rated 3A@30VDC), indicates the door locked
or unlocked status.
Operating Temperature: -30~+55 C
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
Current Draw: 420mA@12 VDC; 210mA@24 VDC
)at temperature 20 C(
Magnetic bond sensor monitor output (GS-200M)
(SPDT rated 3A@30VDC), indicates the door locked
or unlocked status.
Operating Temperature: -30~+55 C
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20 C
Holding Force: Up to 1200 lbs (545 Kg) in shear.
The Gap between the Lock and Armature plate is 2 mm
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight )Approx.(: 1.2 Kg
The Gap between the Lock and Armature plate is 2 mm
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight )Approx.(: 1.2 Kg
±
Horizontal Installation
Patent
GB 2400626 (Great Britain)
2854190 (France)
2003100306 (Australia)
219858 (Taiwan)
Nr.203 06 200 .0 (Germany)
ZL 03 2 45413.9(China)
2854190 (France)
2003100306 (Australia)
219858 (Taiwan)
Nr.203 06 200 .0 (Germany)
ZL 03 2 45413.9(China)
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw