Therma-Stor Products Group Phoenix 200 HT 사용자 설명서

2

Part No. 

4025900

Power 

7.5 amps, 0-20 VAC, Grounded

40 pints/day @ AHAM (80

°

F, 60%) 

Removal 

26 pints/day @ saturation 

 

32 gal/day maximum @ saturation

Blower 

325 CFM without external ducting 

 

30 CFM @ .5 IWG external static

 

33°F min., 25°F max.

 

Refrigerant    lbs., 4 oz. R-22 
Charge

 

Filters 

6” x 20” x 2” Pleated Media MERV-

Duct Options  Intake – 2” Flex-Duct 
 

Supply – 0” Lay-Flat 

Warranty 

Five years; 

 

st year 00% of Parts and Labor 

 

2nd–5th year 00% of Parts of sealed 

 

refrigeration system.

 

Machine  

Shipping

Width  

20.25”  

24” 

Height  

40”  

45.25” 

Depth  

2.375”  

25.5” 

Weight  

38 lb  

64 lb

The Phoenix 200 HT must always be upright when 
transported by vehicle. It may be tipped onto its handle 
and back for loading and moving by hand. The Phoenix 
200 HT features a high-impact plastic skid plate which 
protects the unit while navigating obstacles such as curbs, 
stairways, and while loading into vehicles.

The Phoenix 200 HT plugs into a common grounded outlet 
on a 5 Amp circuit. It draws 7.5 Amps at 80°F, 60% RH. 
If used in a wet area, a ground fault interrupter (GFI) is 
required. If an extension cord is required, it must have a 
minimum of 4 gauge conductors if 25 feet long or less 
and 2 gauge conductors if greater than 25 feet long.

• It is designed to be used INDOORS ONLY.
• If used in a wet area, plug it into a GROUND FAULT IN-

TERRUPTER.

• DO NOT use the Phoenix 200 HT as a bench or table.
• It must always be used in the upright position.

Introduction ................................................................
1.   Specifications ........................................................2
2.   Operation .............................................................2
 

2. Transporting  ...................................................2

 

2.2 Electrical Requirements  ..................................2

 

2.3 Condensate Removal  ......................................2

 

2.4 Ducting ...........................................................2

 

2.5 Power Switch  .................................................3

 

2.6 Pump Purge Switch  .........................................3

 

2.7 Hour Meter  ....................................................3

 

2.8 Temperature Specific Operation  .......................3

 

2.9 Low Pressure Control  ......................................4

3.   Maintenance .........................................................4
 

3. Air Filter  .........................................................4

 

3.2 Storage  .........................................................4

4.   Service .................................................................

4

 

4. Technical description  ......................................5 
4.2 Troubleshooting  ..............................................5

 

4.3 Blower Replacement  .......................................6

 

4.4 Defrost Thermostat and Timer  .........................6

 

4.5 Condensate Pump  ..........................................6

 

4.6 Gravity Drain Option  ........................................6

 

4.7 Relay ..............................................................7

5.   Options and Accessories  .......................................7
6.   Wiring Diagram  ....................................................7
7.    Service Parts  .......................................................8
8.   Warranty

  ..............................................................9

Serial No. ___________________________

Purchase Date ______/______/_____

Dealer’s Name ___________________________________