Fantom Vacuum FS800 전단

Filter Care

Bagless Stick Vac

Warning

: To reduce the risk of electric shock, the power cord must be

disconnected before cleaning, changing the HEPA-TYPE filter,

or performing maintenance/trouble shooting checks.

4. Reassemble the debris screen to the

HEPA-Type filter cartridge and

replace into dust cup (container).

Ensure that the filter assembly is

completely seated inside the dust cup

(container).

5. Attach the dust cup (container) to the

vacuum.

Important:

Do NOT use the HEPA-

Type filter cartridge without the debris

screen in place.

Wash

once a

month or

when

suction

appears

reduced

Fig. A

PLEASE NOTE: The white pleated

filter material in the HEPA-TYPE Filter

will discolor over time -This is

NORMAL and will NOT affect the

performance of the filter. If the HEPA-

TYPE Filter

is properly

cleaned

after each use

and suction

does not return

to 100%, then

we suggest that

the HEPA-TYPE

Filter be cleaned

vigorously until

no more dust

can be removed,

then rinsed under the faucet and

allowed to air dry for 24 hours before

replacing into the vacuum. (Fig. A)

This should be done once a month

or when suction appears to be

reduced .

Warning:

Allow 24

hours for drying before
replacing in unit.

NOTE: If you wash the HEPA-TYPE

filter, make sure that it has

completely air dried for 24 hours

before inserting back in the

vacuum.

Warning:

Always empty the dust cup and clean the HEPA-Type dust cup

filter before each use and during prolonged usage. Never over fill the dust cup -

remove dirt and clean the HEPA-Type dust cup filter during prolonged usage or risk

motor damage. Make sure that the debris screen and the HEPA-TYPE filter

have completely air dried before replacing into the vacuum.

Cleaning & Changing the HEPA-
TYPE Dust Cup Filter

1. After you have emptied the dust from

the Dust Cup (container), separate

the debris screen from the HEPA-

Type filter cartridge by grasping the

debris screen with one hand and the

filter frame with the other and pull

apart.

Debris Screen

HEPA-TYPE

Filter

2. Rinse the debris screen under the

faucet until clean. Allow to air dry or

dry with a clean dish towel. Do NOT

wash in dishwasher.

3. To clean the HEPA-Type filter

cartridge, hold filter by frame flange

and tap filter on the inside wall of a

dust container (garbage can).

Ensure that you do not damage the

pleated filter material during cleaning.

Also note that discoloration occurs

during use. This does NOT affect the

filter’s performance.