Philips AC4065 사용자 설명서

  

Press the timer button to set the operating time (1, 4 or 8 hours) (Fig. 13).

The corresponding timer light goes on.

To deactivate the timer function, press the timer button and keep it pressed until the timer

light goes out.

When the set time has elapsed, the appliance automatically switches to standby mode.

 1 

Put the plug in the wall socket

  

Press the on/off button to switch on the appliance. (Fig. 14)

  

Set the speed slide to the desired speed: low, medium or high (Fig. 15).

ê

 = low speed 

ë

 = medium speed 

í

 = high speed 

The corresponding speed light goes on.

  

Press the on/off button to switch off the appliance and unplug the appliance.

Always unplug the appliance before you clean it.
Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric

shock and/or a fire hazard.
Do not clean the appliance with water or any other liquid or a (flammable) detergent to avoid

electric shock and/or a fire hazard.

Regularly clean the inside and outside of the body to prevent dust from collecting on the inside and 

outside.

 1 

Wipe away dust with a dry, soft cloth from the body of the appliance.

  

Clean the air inlet and the air outlet with a dry soft cloth.

Never touch the corona particle charger with your fingers. Always clean the corona particle

charger with the special soft cleaning brush, which is stored in the front panel.

Be extra careful when you clean the corona particle charger: the wires are very fragile.

 1 

Take the soft cleaning brush out of the front panel.

  

Pass the brush gently along the top and bottom of the corona particle charger.

 1 

Remove the filters from the appliance (see chapter ‘Filter replacement’, section ‘Removing

the filters’).

  

Remove visible dirt with a vacuum cleaner.

 1 

Clean the pre-filter with a vacuum cleaner.

,

,

-

-

-

,

9