ZyXEL Communications 3110 사용자 설명서
Chapter 2 SHD1110 Programming
Z-Wave Series Programming Guide
9
Temperature (Celsius)
The following parameters are used in this example:
Sensor Value 1 = 0x01
Sensor Value 2 = 0x31
Temperature (C)= (Sensor Value 1*256 + Sensor Value 2)/10 = (1*256+49)/10 = 30.5 (C)
Temperature (Fahrenheit)
2.1.1.3 Low Battery Report
When the battery level of the SHD1110 drops to a low level, the icon
will appear on the
SHD1110’s LCD and the detector will emit ALARM_REPORT command to Grouping 1.
The Z-Wave Controller may enquire the battery status of the SHD1110 by sending BATTERY_ GET.
Once the SHD1110 receives the command, it will return BATTERY_REPORT command to the
controller.
Once the SHD1110 receives the command, it will return BATTERY_REPORT command to the
controller.
If the message shows "Battery Level = 255 (0xFF)", it implies that the SHD1110 is at low battery
status. Please replace the batteries as soon as possible, otherwise the SHD1110 will shut down.
status. Please replace the batteries as soon as possible, otherwise the SHD1110 will shut down.
Note: The SHD1110 will send out a low battery command as long as there is a device
associated into Grouping 1 of the SHD1110, even if the RF function is set to disable.
2.1.2 Grouping 2
Grouping 2 includes the BASIC_SET commands.
SENSOR_MULTILEVEL_REPORT
[Command Class Sensor Multilevel, Sensor Multilevel Report, Sensor Type = 0 x
01 (Air Temperature), Precision+Scale+Size = 0 x 22, Sensor Value 1 = (High
Byte of Temperature Value), Sensor Value 2 = (Low Byte of Temperature Value)]
SENSOR_MULTILEVEL_REPORT
[Command Class Sensor Multilevel, Sensor Multilevel Report, Sensor Type = 0 x
01 (Air Temperature), Precision+Scale+Size = 0 x 2A, Sensor Value 1 = (High
Byte of Temperature Value), Sensor Value 2 = (Low Byte of Temperature Value)]
ALARM_REPORT Command
[Command Class Alarm, Alarm Type = 0x01, Alarm Level = 255(0xFF)]
BATTERY_REPORT
[Command Class Battery, Battery Report, Battery Level = 20%-100%]