Lg Electronics GC3 사용자 설명서

WARNING: This appliance is equipped with a safety control sys-

tem designed to protect against improper venting of combustion

products. Operation of this heater when not connected to a prop-

erly installed and maintained venting system or tampering with

the blocked vent shut-off system can result in carbon monoxide

(CO) poisoning and possible death.

Insert must be vented to the outside in accordance with the current
edition of the National Fuel Gas Code ANSI-

Z223.1-latest edition,

also known as NFPA 54

. The insert must not be connected to a

chimney flue serving a separate solid fuel burning appliance.

This gas insert requires a 4” diameter B-vent or listed flex alu-

minum  or  stainless  chimney  liner  extending  the  entire  length

of  the  chimney  to  ensure  proper  operation.    The  vent  should

terminate with a chimney cap or rain cap. Chimney should be

sealed around cap to prevent air and rain from entering chimney.

Adhere to vent manufacturer's instructions for installation and

vent termination.

This  insert  has  a  detachable  flue

collar to ease installation. To detach

flue collar lift removable vent (trivet)

from top of insert, unscrew draft tube

retaining  screw  (see  Figure  5)  and

slide draft tube and flue collar to the

rear. Attach flue collar (with 3 sheet

metal screws or a B-vent connector)

to  vent  pipe  previously  installed  in

chimney. As the insert is pushed into

fireplace guide draft tube and flue col-

lar into guide brackets until draft tube

retaining screw can be reinstalled in

its original hole.