Lopi Freedom Bay Fireplace Insert 사용자 설명서

© Travis Industries

100-01163

4041129

This appliance relies upon natural draft to operate.  External forces, such as wind, barometric pressure,
topography, or factors of the home (negative pressure from exhaust fans, chimneys, air infiltration, etc.),
may adversely affect draft.  Travis Industries can not be responsible for external forces leading to less
than optimal performance.

Two leveling bolts are included to level the insert if the fireplace has a stepped-up hearth.  To install, raise
the rear of the insert up and insert the leveling bolts into the holes in the rear corners of the insert.  Adjust
the bolts until they extend the same height as the hearth steps up.  After the insert is installed, fine-tune
the leveling bolts to level the insert (see Figure 4).

AAA

AAA

AAA

AAA

AAA

AAA

This distance is the 

hearth step-up.  The 

leveling bolts should 

stick out this far from the 

base of the insert.

Fireplace

Hearth

The leveling bolts go 

into the holes at the 

rear corners of the 

insert.

The included blower is fragile and should be installed last (see the directions below).

AA

AA

AA

A

A

A

Remove the two 

screws underneath the 

ashlip with a 3/8" 

nutdriver.  Align the 

blower under the 

ashlip and replace the 

two screws to secure.

AAAA

AAAA

AAAA

AAAA

AAAAA

AAAAA

AAAAA