Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. Regency
  4. U32-NG4
  5. 사용자 설명서

Regency U32-NG4 사용자 설명서

다운로드
페이지 중 40
10
U32-4 FPI Direct Vent Gas Insert
6)  Place the Left Top Log D)02-46 on the pin 
on Log  C)02-56 and on top of the cutout 
on Log A)02-43.
7)  Place the notch in Center Log E)02-47 over 
Log B)02-45 and across the cutout on Log 
A)02-43.
8)  Position notch in Front Right Log F)02-48 
on Log E)02-47 and push the bottom right 
edge against the bracket on the burner tray 
and the front edge of the rear burner.
Logs D)02-46 and E)02-47 in position.
Notch
Bracket
Cutout
Pin
D)02-46
C)02-56
A)02-43
Cutout
Notch
E)02-47
B)02-45
A)02-43
Logs A)02-43, C)02-56, 
and B)02-45 in position
Pins on Rear Log Support
A)02-43
B)02-45
C)02-56
3)  Place Rear Log A)02-43 on the two pins on 
the rear log support.
4)  Place Front Right Log B)02-45 on the two 
pins as shown.
5)  Place the Middle Left Log C)02-56 on the 
two pins as shown.
F)02-48
B)02-45
E)02-47
INSTALLATION
LOG SET 
INSTALLATION
Read the instructions below carefully and 
refer to the diagrams.  If logs are broken 
do not use the unit until they are replaced. 
Broken logs can  interfere with the pilot 
operation.
The gas log kit contains the following:
a) 02-43  Rear 
Log 
b) 02-45  Front 
Right 
Log 
c)  02-56  Middle Left Log 
d) 02-46  Left 
Top 
Log 
e) 02-47  Center 
Log 
f) 02-48 Middle 
Right 
Log 
g)  02-44  Front Left Log 
h)    Embers 
 
i)    Rockwool 
j)    Vermiculite 
Note:  Install Optional Brick Panels prior to 
installing logs.
The "02" refer numbers (i.e. 02-43) are 
molded into the rear of each log.
1)  Carefully remove the logs from the box and 
unwrap them.  The logs are fragile, handle 
with care - do not force into position.
2)  Sprinkle the vermiculite around the fi rebox 
base. Take  some of the embers (approx. 
1/3 of the bag) and sprinkle over the 
vermiculite. 
Vermiculite 
and embers.
Vermiculite 
and embers.
Vermiculite 
and embers.