Regency U32-LP4 사용자 설명서

U32-4 FPI Direct Vent Gas Insert

11) Mount the cast faceplate panels onto  the insert body,  sliding the 

side fi ller brackets into the space between the glass and the fi rebox.  
Secure using the 4 remaining black screws, 2 per side.

Install the glass trim by inserting the side hooks on the glass trim 
into the 4 slots between the faceplate and the glass. Push the 
glass trim down fi rmly with both hands to lock into place.

12) To put on the Hampton

®

 logo, peel the sticker from the back of the 

logo and place it centered on the bottom left hand corner of the 
faceplate.

Before the grills are installed, a grill stop bracket needs to be put in 
place. 

1)  The U32 grill stop  bracket is installed in the bottom left corner just 

under the fi rebox as shown below.

2)  Place top grill into brackets located inside top of fi rebox as shown.

3)  The bottom grill, shown in the diagram below, has 2 hinges that are 

attached to the lip on the bottom of the unit. Secure using 2 screws 
per hinge.