Quadra-Fire CB1200I 사용자 설명서

Page  18

7014-188B

February 3, 2010

R 

R 

R 

Parts Required:
Part 811-0680, Rear Shroud Kit.  
Part 811-0690, Rear Vent Kit
Includes: Rear Vent Adapter and fastener package.

Electric drill, 1/8 inch drill bit, Phillips screw driver, 3/8 inch 

wrench & 7/16 inch wrench, (7/16 inch socket wrench & high 

temperature silicone adhesive are also required for rear vent 

installations).

 

Part 811-0680, Rear Shroud Kit. 

Includes: Six galvanized steel shroud pieces, two cover 

plates and fastener package.
Part 811-0650, Rear Shroud Top Vent 

Includes: Vent pipe and two 1/4 - 20 x 3/4 inch bolts with 

nuts.
Part 811-0660, 3 inch Top Vent Adapter  or  Part 811-0670, 

4 inch Top Vent Adapter

Vertical Exhaust 

Transition Pipe

Top Vent Adapter

1.  Remove the top vent adapter from the vertical exhaust 

transition pipe.  Figures 18.2 and 18.5.

2.  Use 2 screws to attach left corner filler piece of rear 

shroud to the insert hopper.  Figures 18.1 and 18.2.

3.  Use (2) 1/4 - 20 x 3/4 inch bolts with nuts to install rear 

shroud top vent to the exhaust transition. See boxed 

area in Figure 18.3.  (Circled area, top vent adapter, 

will be installed later).

4.  Install the left shroud panel corner at 3 points, 2 screws 

into back of hopper and 1 down into the filler piece).
Figure 18.4

(Note:  All photos depict top vent 

installation).