Quadra-Fire CB1200I 사용자 설명서

R 

R 

R 

February 3, 2010

7014-188B

Page  29

1.  Metallic noise.

1.  Noise is caused by metal expanding and contracting as 

it heats up and cools down, similar to the sound pro-

duced by a furnace or heating duct.  This noise does not 

affect the operation or longevity of your appliance.

2.  Ash buildup on glass.

2.  This is normal.  Clean the glass.

3.  Glass has turned dirty.

3.  Excessive build up of ash.  The lower burn settings will 

produce more ash, the higher burn settings produce 

less.  The more it burns on low the more frequent clean-

ing of the glass is required.

4.  Fire has tall flames with black tails and is lazy.

4.  The feed rate needs to be reduced or the firepot needs 

cleaning.  Heat exchanger or exhaust blower needs 

cleaning.

5.  Smokey start-up or puffs of smoke from the airwash. 5.  Either the firepot is dirty or there is too much fuel at 

start-up and not enough air.  Close down feed rate 1/4 

inch (6mm) at a time until this no longer happens.

6.  Large flame at start-up.

6.  This is normal.  Flame will settle down once the fire is 

established.

 Odors and vapors released during initial operation.

•  Curing of high temperature paint.

•  Open windows for air circulation.

Odors may be irritating to sensitive individuals.