Quadra-Fire CASTINS-CSB 사용자 설명서

R

August 20, 2009

250-7251G

Page  21

1. Screw panels

together

2. Bend tabs down

1. Screw panels

together

3. Install Cast Trim Header

2. Bend tabs

down

Mounting tabs on each panel leg
to match up with slots on insert.

Included in Panel Kit:  (2) side panels, left and right; (1) 
panel top; (1) fastener package.

Included in Cast Trim Kit:  (2) cast trim legs, left and right; (1) 
cast trim header; (2) cast trim footers, left and right; (1) fastener 
package. 

Tools Needed: Powered Phillips head screw driver

1.  Secure  the  top  panel  to  the  panel  sides  with  the 

screws provided. Figure 21.3.

2.  Assemble the gold trim with the (2) corner brackets 

provided. Figure 21.4.

3.  Slide the assembled trim over the assembled panel 

set.

4. 

Slide  panel  and  trim  over  the  top  of  the  insert  into 

place matching the mounting tabs on the panel with 
the slots on the insert.

Back of Top Panel

Back of Side Panel

Screws

1.  Remove  contents  from  box  being  careful  not  to  scratch  or 

damage the cast trim pieces.

2.  Lay the panel set face down on protective covering to prevent 

scratching the painted surface.

3.  Secure the panels legs to top panel with the screws provided.

4.  Now bend the tabs down toward the backside of the panel set, 

5 on top and 2 on each leg.  Leave the panel set face down.

5.  Place the corresponding cast trim pieces ( 2 cast trim legs and 

1 cast trim header) underneath the panel set, also face down.

6.  Place washer provided over tab and secure the trim and panel 

together with screw.  Continue for all tabs.

7.  Secure cast footers with screws. 

8.  Remove both left and right cast sides from insert, See Figures 

9.  Slide panel and trim over the top of the insert into place matching 

the mounting tabs on the panel with the slots on the insert.

  (2)  corner  brackets  and  set 

screws;  (1)  trim  set,  3  piece;  (2)  side  panels;  (1)  top  panel; 
(4) screws; 

Tools Needed: Powered Phillips head screw driver

•  Do NOT pick up assembled unit by corners.  
•  It is too heavy and may damage the panels.  
•  Pick up from center.

View of "L" Bracket

installed