John Deere T115 사용자 설명서

107351-01C

Periodic Service

1.

Unplug heater.

2.

Remove side cover screws to expose ignition

control assembly.

3.

Remove fuse cover (A).

4.

Remove fuse from fuse clips (B).

5.

Replace fuse (C) with fuse of the same type

and rating (GMA-10). Do not substitute a fuse with a
higher current rating.

6.

Replace fuse cover.

7.

Replace side cover.

Flush

IMPORTANT: Remove fan from motor shaft before
removing motor from heater. The weight of the motor
resting on the fan could damage the fan pitch.

1.

Remove upper shell and fan guard.

2.

Loosen setscrew (A) which holds fan (B) to

motor shaft (C).

3.

Slip fan off motor shaft.

4.

Clean fan using a soft cloth moistened with

kerosene or solvent.

5.

Dry fan thoroughly.

6.

Replace fan on motor shaft. Place fan hub flush

with end of motor shaft.

7.

Place setscrew on flat of shaft. Tighten set-

screw firmly (40 to 50 in-lbs/4.5 to 5.6 N-m).

8.

Replace fan guard and upper shell.

B

C

A

B

C

A