Dimplex DFG253A 사용자 설명서

다운로드
페이지 19
 
13
 
Maintenance
WARNINg:  Disconnect  
 power before attempting any  
 maintenance or cleaning to  
 reduce the risk of fire, electric  
 shock or damage to persons.
Light Bulb Replacement
Allow at least five (5) minutes for 
light bulbs to cool before touching 
bulbs to avoid accidental burning 
of skin.
Light bulbs need to be replaced 
when you notice a dark section 
of the flame or when the clarity 
and detail of the log ember bed 
exterior disappears.  There are 
two (2) bulbs under the log set, 
which generate the flames and 
embers.
Light Bulb Requirements
Quantity of two (2) clear 
chandelier or candelabra bulbs 
with an E-12 (small) socket base, 
60 Watt rating.  Example: GE 
60bC or Philips 60 CTC.
Do not exceed 60 Watts per 
bulb.
Helpful Hints
It is a good idea to replace both 
light bulbs at one time if they are 
close to the end of their rated life.  
Group replacement will reduce 
the number of times you need 
to open the unit to replace light 
bulbs.  Care must be taken when 
removing the log set.  
  
Operation
This will synchronize the remote 
control transmitter and the 
fireplace receiver.
!
 NOTE: You will have only 10 
seconds to perform this last 
step. Failure to do so will result 
in these steps needing to be 
followed again.
If you are still experiencing issues 
with your remote control, contact 
Dimplex North America Limited 
Customer Service at  
1-888-346-7539, or visit the 
Dimplex website at  
www.dimplex.com.