Haier AS12QS2ERA 사용자 설명서
English
9
Exhaust the vitiated air from the room, and inhale fresh air.
(This function is unavailable on some models.)
Press FRESH button “
is displayed
on the remote controller and Now, the
display board of the air conditioning
unit will turn GREEN, and the change-
for-fresh-air function operation begins.
Note: Since this model has no fresh air
unit installed, there is no change for the
operating status.
For twice press , the display “
”
disappears and the change-for-fresh-
air function operation is canceled.
Press “HEALTH” button when operating in heating
pressing “HEALTH” button, it displays in green for
3 seconds, then red for 10 seconds, and green for
3 seconds, repeating this cycle.
If you press “FRESH” button in heating or health
operating mode, a purple display appears in addition
to the above red and green display cycle; that is,
purple for 3 seconds, red for 10 seconds, green for
3 seconds, purple for 3 seconds, red for 10 seconds,
green for 3 seconds, repeating this cycle.
3 seconds, then red for 10 seconds, and green for
3 seconds, repeating this cycle.
If you press “FRESH” button in heating or health
operating mode, a purple display appears in addition
to the above red and green display cycle; that is,
purple for 3 seconds, red for 10 seconds, green for
3 seconds, purple for 3 seconds, red for 10 seconds,
green for 3 seconds, repeating this cycle.
Emergency Operation:
Use this operation only when the remote controller is
defective or lost, and with function of emergency running,
air conditoner can run automatically for a while.
When the emergency operation switch is pressed, the
“Pi” sound is heard once, which means the start of this
operation.
defective or lost, and with function of emergency running,
air conditoner can run automatically for a while.
When the emergency operation switch is pressed, the
“Pi” sound is heard once, which means the start of this
operation.
emergency operation starts, the unit will run automatically in
the following modes:
the following modes:
Room
temperature
Designated
temperature
Timer
mode
mode
Fan
speed
Operation
mode
Above 24 ºC
24 ºC
No
AUTO
COOL
Below 24 ºC
24 ºC
No
AUTO
HEAT
It is impossible to change the settings of temp. and fan
speed, It is also not possible to operate in timer or dry mode.
speed, It is also not possible to operate in timer or dry mode.
Test operation:
T
est operation switch is the same as emergency switch.
Use this switch in the test operation
when the room temperature is below
16 ºC, do not use it in the normal
operation.
Continue to press the test operation
switch for more than 5 seconds.
After you hear the “Pi” sound twice,
when the room temperature is below
16 ºC, do not use it in the normal
operation.
Continue to press the test operation
switch for more than 5 seconds.
After you hear the “Pi” sound twice,
Air Filter cleaning
1.
Open the inlet grille by pulling
it upward
it upward
2.
downward.
3.
Use a vacuum cleaner to remove dust, or wash
completely in the shade.
4.
the “FRONT” indication is facing
to the front. Make sure that the
to the front. Make sure that the
the stopper. If the right and left
defects.
5.
Close the inlet grille
FRESH Operation
Emergency operation and test operation
For smart Use of The Air Conditioner
Operation
AM
SMART
SLEEP
LIGHT
CHILD
LOCK
LOCK
FRESH
QUIET
Note:
If the unit didn’t install change-for-fresh-air electrical
engine, change-for-fresh-air function is not available.
Pi
Pi Pi
Once every
two weeks
two weeks