Haier HWE06XCN 사용자 설명서

다운로드
페이지 79
FILTER RESET
This feature automatically notifies you that the air filter must be cleaned. The indicator light will 
come on after 240 hours of operation. Clean the air filter (refer to Care and Cleaning), place it back 
in the front panel, and press the Filter Reset button. The light will turn off.
NOTE: The raised dots are Braille for the visually impaired. (See Fig.22)
Remote control may differ in appearance from the image shown.
NOTE:  Remove and discard protective film prior to use. The remote control runs 
on one CR2025 battery (included). Replace battery after 6 months of use, 
or when the remote control starts to lose power. To change battery, first 
remove screw on back panel of remote.
POWER
Mode
Press MODE to choose Fan, Energy  Save,   
 Cool  or Dehum.
Speed
Press SPEED to choose High, Med, Low or Auto Cool.
TIMER
To set the air conditioner to turn off after a set amount between 1 hour and 24 hours (unit must 
be ON):
1.  r
P  ess TIMER. Timer OFF indicator light on the air conditioner control panel will flash.
2.  r
P  ess the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 
hours.
3. 
 r
e
t
f
A
 
5 seconds, Timer OFF indicator light on the air conditioner control panel will remain on.
PAGE 18 
USING YOUR AIR CONDITIONER
ENGLISH
STARTING THE AIR CONDITIONER cont.
USING THE REMOTE CONTROL
Fig. 22
ON/OFF
MODE
SPEED
TIMER
TEMP/TIME
TEMP/TIME
Pr
button, the air conditioner will operate in Energy Save mode, low fan speed and 
temperature of 72
°F. You can select any other mode to satisfy your needs.
ess ON/OFF to turn on the air conditioner.When you first press the ON/OFF 
TO SET TIMER TO TURN ON THE AIR CONDITIONER, KEEPING PREVIOUS SETTINGS:
1. Turn on the air conditioner.
2.  r
P  ess TIMER. Timer On indicator light on the air conditioner control panel will flash
3.  r
P  ess the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 
hours.
4. 
 r
e
t
f
A
 
5 seconds, Timer On indicator light on the air conditioner control panel will remain on.