Haier HWR06XCJ 사용자 설명서

3.    Slide the side bracket over the screw.

4.     Tighten the screw. The side bracket should be resting on the 

windowsill.

5.     Use ¹⁄₈” drill bit to drill a starter hole through the holes in the 

side bracket and windowsill.

6.     Using two ³¹⁄₃₂” screws, attach the side bracket to the  

windowsill.

7.     Repeat for side bracket installation on the left-hand side of 

the air conditioner.

2.     Loosen the screw on the right-hand side of the air conditioner 

cabinet near the bottom.

1.    Pull the left-hand curtain out until it fits into the window  

channel.

2.    Use a ¹⁄₈” drill bit to drill a starter hole through the top hole in 

the side curtain and into the window sash.

3.     Insert one of the ³¹⁄₃₂” screws through the top hole of the 

lefthand curtain and into the window sash.

4.   Repeat for the right-hand curtain.

■

   Handle the air conditioner gently.

■

    Be sure your air conditioner does not fall out of the opening 

during installation or removal.

■

    The place where the power cord exits the air conditioner should 

be no more than 6 ft (183 cm) from a grounded outlet.

■

   Do not block the louvers in the front panel.

■

   Do not block the louvers on the outside of the air conditioner.

1.    Center the air conditioner in the window. Lower the window 

sash behind the top channel to hold the cabinet in place

NOTE: Your model may differ from the one shown.