Samsung SH09BPHX 사용자 설명서

If necessary, press the       (On/Off) button.

Result:

◆ The operation indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected   

when the unit was last used.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started 
immediately after being:
◆ Plugged in

◆ Stopped
lt will start up normally after three minutes.

If the       is not displayed at the top of the remote control, 
press the

button on the remote control one or more times until it 

appears.

Result:

◆ The indoor unit beeps each time you press the

button.

◆ The air conditioner runs in COOL mode.

You can change modes at any time.

To adjust the temperature, press the

button one or more times until

the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.

Result:

◆ Each time you press the 

button: 

- The temperature is adjusted by 1°C
- The indoor unit beeps

◆ The air conditioner starts cooling, provided that the room

temperature is higher than the selected temperature.

◆ If the room temperature reaches the set temperature, the air

conditioner stops cooling, but the fan is still operating.

Select the fan speed by pressing the

button one or more times

until the required setting is displayed:

Automatic (rotated :                                               ) 

Low

Medium

High

Result:

Each time you press the

button, the indoor unit 

beeps.

To control the direction of the air flow, refer to pages 16 and 17.

◆ Cooling temperature
◆ Fan speed when cooling

E-

10