Samsung AW2402B 사용자 설명서
E-
10
Removing Excess Humidity
☛
Remote Control
Control Panel
If the temperature is not displayed on the control panel:
◆
◆
Press the button on the remote control
or
◆
Press the button on the unit one or more times until the
temperature is displayed.
Result: ◆ The unit beeps each time you press the / button.
◆
The air conditioner starts up in the Cool mode.
➢
You can change modes at any time.
2
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
excess humidity without lowering the room temperature too much.
1
If necessary, press the (On/Off) button.
Result: ◆ The air conditioner starts up in the Cool mode.
Result: ◆ The air conditioner starts up in the Cool mode.
◆
The unit beeps.
The air conditioner is fitted with a protection mechanism to pre-
vent the unit from being damaged when it is started immediately
after being:
◆
Plugged in
◆
Stopped
It will start up normally after three minutes.
3
To adjust the temperature, press the
or buttons one or
more times until the required temperature is displayed.
Possible temperatures are between 64°F and 86°F inclusive.
Result: ◆ Each time you press the
Result: ◆ Each time you press the
or buttons:
- The temperature is adjusted by 1°F
- The unit beeps
◆
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4
To control the direction of the air flow, refer to page 11.