Samsung AW0801B 사용자 설명서

E-

9

To set the fan speed:

◆ 

Press the          ,          or           button on the remote control as desired.

or

◆ 

Press the        button on the unit one or more times until the 

desired fan speed(F1, F2 or F3) is displayed.

Low

Medium

High

To control the direction of the air flow, refer to page 11.

If the fan speed(F1, F2 or F3) is not displayed on the control panel:

◆ 

Press the

button on the remote control

or

◆ 

Press the

button on the unit one or more times until the fan speed

(F1, F2 or F3) is displayed.

Result:

◆ 

The unit beeps each time you press the

/       button. 

◆

The air conditioner starts up in Fan mode.

➢

◆

You can change modes at any time.

◆

When the air conditioner is in the Fan mode, the temperature 

cannot be set or displayed.

If necessary, press the 

(On/Off) button.

Result:

◆ 

The air conditioner starts up in the mode selected when           

the unit was last used.

◆

The unit beeps twice.

If you wish to discharge stale air, push the ventilation lever on the front of the

unit to the right and open position (

).

Result:

◆ 

The air inside the room circulates and stale air is discharged 

outside.

Otherwise, push the ventilation lever to the left and closed position (

).

Result:

◆ 

The air simply circulates inside the room.