Samsung AW12FAMAA 사용자 설명서

You must select the Cool mode if you wish to lower the temperature in your
room. You can also set the fan speed.

If necessary, press the

(On/Off) button.

Result:

◆

The operating mode indicator (COOL or FAN) on

the unit comes on.

◆

The air conditioner starts up in the mode selected
when the unit was last used.

◆

The unit beeps twice.

☛

The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:

◆

Plugged in

◆

Stopped

It will start up automatically after about three minutes.

If the COOL indicator is not lit up on the unit:

◆

Press the button on the remote control
or

◆

Press the MODE button on the unit one or more times until the COOL
indicator lights up

Result:

◆

The unit beeps each time you press MODE.

◆

The air conditioner starts up in Cool mode.

➢

You can change modes at any time.

To adjust the temperature, press the or

button on the remote

control one or more times until the required temperature is displayed.
To adjust the temperature, press the or

button on the unit one

or more times until the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive.
Result:

◆

Each time you press the temperature buttons:
– The temperature is adjusted by 1°C and

displayed on the control panel

– The unit beeps

◆

The air conditioner starts cooling if the room temperature is
higher than the selected temperature.

To set the fan speed to...

Then...

Result:

Each time you press a button, the unit beeps.

To control the direction of the air flow, refer to page 10.

Cooling Your Room

Remote Control

Control Panel

High

◆

Press the button on the remote control.

◆

Press the on the unit until the

indicator lights up

Med

◆

Press the button on the remote control.

◆

Press the on the unit until the

indicator lights up

Low

◆

Press the button on the remote control.

◆

Press the on the unit until the

indicator lights up

E-