Samsung AW0510D 사용자 설명서

E-

10

◆

Check for a power failure.

◆  

Check the voltage.

(See the technical specifications)

◆  

Check the power plug for disconnection.

◆  

Check to see whether the SELECTOR is placed in the "OFF" position.

(Set it to the desired position.)

◆  

Check to see whether the room temperature is too low.

- Refer to page 8 for details about temperature condition.

◆

Set the THERMOSTAT control to the desired position.

- When the number on the THERMOSTAT control is high, the room 

temperature may be too warm.

◆  

Check to see whether there is any open window or leakage of cool 

air to the outside.
- Close the window, and fill the gap.

◆  

Check to see whether there is any obstacle adversely affecting 

the flow of the air inside and outside the room.
- Remove the obstacle or change the position of the air conditioner.

◆  

Check to see whether the air filter is clogged with dust or

contaminated with foreign substances.

- Clean the air filter.

◆  

Check to see whether there is any direct sunlight facing the air conditioner.

- Block the sunlight with a sunshade.

◆  

Check to see whether there is any electric device generating heat.

- Do not use the air conditioner together with any heating device.

The air conditioner 
does not operate at all.

The air comes out smoothly, 
but cooling is not effective.