Samsung ASHM070VE 사용자 설명서

Explanation/Solution

◆

Check that the breaker used for the air conditioner is switched on.

◆

Check that the OPERATION indicator on the indoor unit is on;

if necessary press       (On/Off) on the remote control.

◆

Check whether the TIMER indicator on the indoor unit is switched on.

If so:
- Wait until the switch-on time is reached and the air conditioner starts  

up automatically

- Cancel the timer (see page 19 for further details)

◆  

Check whether the operation modes of B unit and C unit are same.

In case of B unit and C unit, the heating and cooling are not
operated simultaneously but only the same operation is possible.
If they are in different operation mode, the first operated unit is run 
but the later one does not operate so that the display part of indoor 
unit shows the flickering lamp of OPERATION (RED) and 
TURBO (RED). Refer to the page 25 for details.

◆

Check that there are no obstacles between you and the indoor unit.

◆

Check the remote control batteries.

◆

Check that you are close enough to the indoor unit (seven metres/

yards or less).

◆

Check that you are pointing the remote control at the infrared sensor 

in the middle of the indoor unit.

◆

Replace the remote control batteries if necessary.

◆

Check that the correct operating mode has been selected 
(       ,      ,      ).

◆

The room temperature may be too low or too high.

◆

Dust may be blocking the air filter guard; refer to page 21 for cleaning 

instructions.

◆

Check that there is no obstacle in front of the outdoor unit.

◆

Check that the required temperature has been set correctly.

◆

Increase the fan speed.

◆

If the air flow is directed downwards, use the remote control to direct it 

upwards.

◆

Check that the operating mode is set to      ,       or       ; in the 

mode, the fan speed changes automatically and in the      mode,

it is set to AUTO.

◆

Check that the air conditioner has been switched on; if necessary, 

press       (On/Off) on the remote control.

◆

Check that you have set the clock to the right time; see page 8.

◆

Check that the timer has been programmed correctly; see page 16.

◆

Air the room.

Problem

The air conditioner does not
operate at all

In case of B unit and C unit, the  
heating and cooling are not
operated simultaneously

The air conditioner does not
operate with the remote control

No beep is heard when you press

(On/Off) on the remote control

The air conditioner does not cool
or heat

When heating, the required room
temperature is never reached and
the air conditioner frequently stops

The fan speed does not change
when you press the         button

The air flow direction does not 
change when you press the

button

The timer is not correctly triggered 

Odours are permeated in the room
during air conditioning

E-

22