Logitech OB450 REVISED EDITION-B 사용자 설명서

(1) Remove the horizontal vane. 
(2) Remove the screw caps of the panel. Remove the 

screws. (Photo 1)

(3) Hold the lower part of both ends on the panel and pull 

it slightly toward you, and then remove the panel by 
pushing it upward.

25

(1)  Slide the sleeve and check if there is a locking lever or not.

(2)  The terminal with this connector has the 
      locking mechanism.

Slide the sleeve.
Pull the terminal while 
pushing the locking
lever.

Hold the sleeve, and 
pull out the terminal 
slowly.

Screws of the panel

Horizontal vane

Conduit cover

Screw of the

conduit cover

Conduit plate

Terminal block 

cover

Terminal block 

cover

Conduit cover

Screw of the

conduit cover

<"Terminal with locking mechanism" Detaching points>

The terminal which has the locking mechanism can be detached as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.