DeLonghi PAC WE 110 사용자 설명서
20
PROBLEM
CAUSE
SOLUTION
The air conditioner
does not come on
•
there is no current
•
it is not plugged into the outlet
•
the internal safety device has tripped
•
wait
•
plug into the outlet
•
call the Service Center
The air conditioner
works for a short time
only
•
there are bends or kinks in the air
exhaust hose
•
something is preventing the air from
being discharged
•
position the air hose correctly, keeping
it as short and free of curves as possible
to avoid bottlenecks.
•
check and remove any obstacles
obstructing air discharge
The air conditioner
works, but does not
cool the room
•
windows, doors and/or curtains open
•
there are heat sources in the room
(oven, hairdryer, etc)
•
the air exhaust hose is detached from
the appliance
•
dust filters clogged
• the technical specification of the
appliance is not adequate for the room
in which it is located.
•
close doors, windows and curtains,
bearing in mind the “TIPS FOR
CORRECT USE” given above
•
eliminate the heat sources
•
fit the air exhaust hose in the housing at
the back of the appliance (fig. 1).
•
clean or replace the filters as described
above
During operation, there
is an unpleasant smell
in the room
• dust filter and (when present)
electrostatic filter clogged
•
clean the filters as described above
The air conditioner
does not operate for
about three minutes
after restarting it
•
the internal compressor safety device
prevents the appliance from being
restarted until three minutes have
elapsed since it was last turned off.
•
wait. This delay is part of normal
operation.
The symbol and
one of the following
messages
LT / HL/Cf/PF / FI
appears on the
LT / HL/Cf/PF / FI
appears on the
appliance display:
•
The appliance has a self diagnosis
system to identify a number of
malfunctions.
•
See the SELF-DIAGNOSIS chapter.
TROUBLESHOOTING