Denso CLASSIC PLUS 14 작동 가이드
7
INSTALLATION (cont.)
Plugging in the Unit
•
Check the prongs and surface of the power cord plug for dust/dirt.
If dust and/or dirt are present, wipe off with a clean, dry cloth.
If dust and/or dirt are present, wipe off with a clean, dry cloth.
•
Check the power cord, plug and prongs for damage or excess play.
If any damage or excess play is found, contact your MovinCool
reseller for repair.
If any damage or excess play is found, contact your MovinCool
reseller for repair.
•
For the Classic Plus 26 model, fully insert plug into the A/C outlet
and rotate clockwise until it locks in place.
and rotate clockwise until it locks in place.
WARNING:
•
If the power cord or plug is damaged, repair should only be
performed by qualified electrical personnel.
performed by qualified electrical personnel.
•
Do not connect/disconnect the power cord or attempt to
operate buttons with wet hands. This could result in electrical
shock.
operate buttons with wet hands. This could result in electrical
shock.
CAUTION:
•
Classic Plus 14 model ONLY: The AC outlet (115 VAC Single
Phase, 60Hz) needs to be rated at 15A or higher. Do not share
the outlet with any other instrument or equipment.
Phase, 60Hz) needs to be rated at 15A or higher. Do not share
the outlet with any other instrument or equipment.
•
Classic Plus 26 model ONLY: The AC outlet (208/230 VAC Single
Phase, 60Hz) needs to be rated at 20A or higher. Do not share
outlet with any other instrument or equipment.
Phase, 60Hz) needs to be rated at 20A or higher. Do not share
outlet with any other instrument or equipment.
NOTE:
•
Make sure the AC outlet is free of dirt, dust, oil, water, or any
other foreign matter.
other foreign matter.
•
The Classic Plus 14 model is equipped with an approved NEMA
plug configuration (L5-15). the appropriate outlet must be used
for this plug type.
plug configuration (L5-15). the appropriate outlet must be used
for this plug type.
•
The Classic Plus 26 model is equipped with an approved NEMA
plug configuration (L6-20). The appropriate outlet must be used
for this plug type.
plug configuration (L6-20). The appropriate outlet must be used
for this plug type.