Danby DAC12344DE 사용자 설명서

E-

10

1 If necessary, press the      (On/Off) button.

Result: 

The air conditioner starts up in the Cool mode.
The unit beeps.

The air conditioner is fitted with a protection mechanism to pre-
vent the unit from being damaged when it is started immediately
after being:

Plugged in
Stopped

It will start up normally after three minutes.

2 If the temperature is not displayed at the top of the control panel, press

the           button on the control panel one or more times until it
appears.
Result:

The unit beeps each time you press the           button.

The air conditioner runs in Dry mode.

You can change modes at any time.

3 To adjust the temperature, press the

or           buttons one or 

more times until the required temperature is displayed.
Possible temperatures are between 18 C and 30 C inclusive.
Result:

Each time you press the

or          buttons: 

- The temperature is adjusted by 1 C
- The unit beeps

The air conditioner starts removing the excess humidity; 

the quantity of air is adjusted automatically.

4 To control the direction of the air flow, refer to page 11.