GE 5100 사용자 설명서

다운로드
페이지 24
21
Problem
Possible Causes
What to Do
CALL SVC
Indicator Light
The compressor
Move the control to 
STOP
and then 
may have failed
restart the unit. If the light reappears 
within 30 minutes, call for service as 
soon as possible.
Burning Odor at the
Start of Heating
Operation
Dust is on the surface of
This can cause a “burning” odor at the 
the heating element
beginning of the heating operation. This
odor should quickly fade.
The Air is Not Always
Cool or Hot During
Operation
The heat pump is not
This is normal. The heat pump will 
producing hot air
produce warm air but not as hot as air
produced when the higher-cost electric
heat is used.
The fan switch may be set
This causes the fan to blow room 
at continuous fan (down)
temperature air even when the 
compressor or heater cycles off. 
The continuous air movement provides 
better overall temperature control.
The Air Does Not Feel
Warm Enough During
Heating Operation
The heat pump alone
Use the Boost Heat Option to warm the 
produces air that feels
air. This adds electric heat to the heat  
cooler than desired
pump when the outside temperature is 
between 25
°
F. and 45
°
F.
Use the Electric Heat Option. This turns
off the heat pump and warms with 
electric heat only.
NOTE: 
Use of either of the above options
will result in increased energy
consumption.