Lennox International Inc. GSB8-S 사용자 설명서

23

STOP! Read the safety information on page 22.

Set the thermostat to lowest setting.

Turn off all electric power to the appliance. 

Remove lower front panel.

Rotate gas control knob slightly and turn clockwise

  to “OFF”

Wait fi ve (5) minutes to clear out any gas. Then smell 

for gas, including near the fl oor. If you smell gas, 

STOP! Follow “B” in the safety information on page 22 

If you don’t smell gas, go to next step.
Find pilot - follow metal tube from gas control. The pilot 

is between two burner tubes as shown in Fig. 15.
Turn knob on gas control counterclockwise

  to      

“PILOT”
Rotate the gas control knob counterclockwise

       

to  “PILOT” Push down and hold the red reset button 

while you light pilot burner with a match.
After about one minute, release reset button. Pilot 

should remain lit. If it goes out, turn gas control knob 
clockwise 

 to OFF To relight, repeat steps 5-9.

If button does not pop up when released, stop and 

• 

immediately call your service technician or gas 

supplier. 
If the pilot will not stay lit after several tries, turn 

• 

the gas control knob to “OFF” and call your service 

technician or gas supplier.

After pilot remains lit when red reset button is released, 

turn gas control knob counterclockwise

  to “ON.” 

Replace lower front panel.

Turn on all electric power to the appliance. 

Set thermostat to desired setting.

 

Set the thermostat to lowest setting.

Turn off all electric power to the appliance if service is 

to be performed.
Push in gas control knob slightly and turn clockwise 

 to “OFF” Do not force.