Lopi Horizontal Or Vertical Vent Freestanding Stove Yankee Pellet Stove 사용자 설명서

Maintenance

3 3

Travis Industries

4050418

1 0 0 - 0 1 1 5 6

Yearly Maintenance (or every two tons) - Continued

Clean the Exhaust Blower (make sure the stove is cool and unplugged)

Restrictor Knob

Open the hopper lid

and remove the

screw holding the

left door in place.
Remove the

restrictor knob.

Swing the left side

panel open.

Remove the six screws holding the

exhaust blower motor in place.

11/32" Socket

Pull the motor out (be careful not

to damage the wiring or blades -
replace gaskt if it is damaged).

Clean the blower blades, blower housing,
and exhaust box. You may wish to use a

vacuum to pull ash out of the vent system.

Exhaust

Motor

Blower
Blades

Blower

Housing

Exhaust Box

Phillips
Screwdriver

Clean the Vent (make sure the stove and vent is cool)

Check the vent sections for creosote
accumulation (indicating a poorly burning
stove). Accumulation over 1/4” must be
removed.

On vertically vented systems, the dirtiest
portion is often the point where the vent turns
upwards (i.e. the "Tee"). Fortunately, the "Tee"
has a built-in clean out cover. Remove the
cover and vacuum out. While open, use a
flashlight to look up the pellet vent to check for
build-up.

Make sure the cap is free of debris
(especially if it has a screen that could
become blocked).

Flyash will deposit along
sections that are horizontal.

AAA

Warning:

Whenever any portion of the pellet vent is disconnected, the joints must be sealed with
RTV 500° F. silicone sealant.