Dansons Group V-50 사용자 설명서

 

Can

adian Comfort Industries      V05                                            

31                                         

 VULCAN “V” SERIES OWNERS MANUAL 

Copyright 2005                                                                     

Dansons Group Inc.

 

 

 

The burn grate top, (D), must fit and seal firmly on the upper lips, of the burn box, (A).  An 
improper seal will allow incoming combustion air to escape, not passing up through the burn 
grate thus reducing the amount of combustion air in the area needed to efficiently burn pellets. 

 

A   

Burn Box 

 

-Combustion air is brought into the backside 
and through the burn grate bottom, back and  

 front 
 

- Check periodically for fly ash build up 

 
B “SUPER 

GRATE” 

 

-Stainless steel construction, slotted bottom 

 

and air holes on front and back 

 

-Slotted hole for Igniter air flow 

 

C Adjustment 

Tab 

 

-Used to fine tune and level burn grate 

 

D 

Super Grate Upper Lip  

 

 
 
 
Adjust the burn grate top so that the burn grate top sits firmly on the top of 

the burn box and level. 

   
 
 
 

Removal of burn grate top:  
(1)Lift  upward  while  sliding  lip  out  from          
under lip of slide                  

    

 

 

 

  

 

(2)Then pull out toward outside of burn box  

 

(3) Installation is reverse of this. 

 
 
 
 
Grasp the burn grate adjustment tab, with a pair of pliers and bend it 
slightly to left or right  (and re-install into burn box) until its length 
allows the burn grate top to rest tightly onto the burn grate bottom 
 

 

B

C

D

A