Motorola CP185 사용자 설명서

The programmable buttons consist of:

•

Side Programmable Button 1   

•

Side Programmable Button 2    

•

Front Programmable Button 1   

•

Front Programmable Button 2 

•

Front Programmable Button 3

The following functions can be assigned as short press i.e. 
press and release; or long press i.e. press and hold for more 

than 1 second.

Backlight

Toggles backlight display between ON and OFF.

Channel Alias 

Toggles display between Channel Number and 
Channel Alias.

Keypad Lock 

Locks or unlocks all buttons except PTT, Side 
Programmable Button 1, Side Programmable 
Button 2, Channel Selector Knob and ON/OFF/
Volume Knob. Applicable for Long Press Only.

Monitor

Monitors the channel for any activity as long as 
the button is pressed.

Nuisance 
Channel Delete

Removes unwanted channel(s) temporarily from 
scan list during Scan. Applicable for Long Press 
Only.

TPL/DPL 
Enable

Enables or disables radio from requiring 
matching TPL/DPL to unsquelch.

Power Level

Selects required power level: High or Low.

Reverse Burst 

Select the Reverse Burst Type: None, 180 or 
240.

Channel Scan

Starts or stops Channel Scan.

Scrambling 
Code Select

Toggles between the two scrambling codes 
available.

Scrambling 
Enable/Disable

Enables or disables scrambling feature for the 
selected channel. Applicable for Long Press 
Only.

Squelch Level

Selects desired squelch level: Normal or Tight.

Sticky Monitor

Toggles the permanent monitor function until the 
button is pressed again. Applicable for Long 
Press Only.

Talkaround/
Repeater Mode

Enables toggle between repeater and
talkaround mode operations.

Unassigned

No function is programmed to this button.

Beacon LKP NALA.book  Page 5  Wednesday, February 25, 2009  5:34 PM