Radio Shack 20-125 전단

20-125

01A07

Printed in China

Whenever the radio is turned on, the last tuned

station will be played.
There are four ways to tune to a radio station:
Manual tuning — Repeatedly press HOUR + or MIN

- to tune up or down.
Automatic tuning — Press and hold HOUR + or MIN

- for more than one second and then release. The

radio searches for a radio program automatically and

stops when a strong signal is received.
Memory tuning — Press the number buttons to

select a preset station directly.
Direct entry to stations — Use the number buttons

to enter the frequency of your station.

presetting radio stations

Store your favorite radio stations as presets in the

memory. You can store up to 10 stations for each

band.

1. Turn on your radio and select a band.
2. Press or hold HOUR + or MIN - to search for a

radio station.

3. Press MEM/TIME to enter the preset mode.
4. As MEMO flashes on the display, press a number

press a number

from 0 - 9 to select a channel number. CH and the

number appears on the display.

5. Press MEM/TIME to store.

store.

6. Repeat steps 2 - 5 to store other stations.

• After you enter the preset mode, complete

each step within 5 seconds, otherwise the

radio exits the presetting mode.

• A newly stored preset station can overwrite a

former preset.

direct entry to stations

1.  Turn on your radio and select a band.
2.  Press ENTER.
3.  Use the number buttons to enter a valid

frequency, and press ENTER.

• For direct entry, complete each step within 10

seconds, otherwise the radio exits the mode

automatically.

• If an invalid frequency is entered,

Err flashes.

• Disregard the decimal point when entering

the frequency. If you want to enter 3.20 MHz

of a SW band, press 0, 3, 2, 0.

using your radio

This product is warranted by RadioShack against manufacturing defects in

material and workmanship under normal use for ninety (90) days from the

date of purchase from RadioShack company-owned stores and authorized

RadioShack franchisees and dealers. For complete warranty details and

exclusions, check with your local RadioShack store.
RadioShack Customer Relations

300 RadioShack Circle, Fort Worth, TX 76102

04/04

limited 90-day warranty

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult your local RadioShack store or an experienced

radio/TV technician for help.

If you cannot eliminate the interference, the FCC requires

that you stop using your radio. Changes or modifications not

expressly approved by RadioShack may cause interference

and void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) This

device must accept any interference received, including

interference that may cause undesired operation.

RF emissions information

Frequency Range.......................FM: �� 10� MH�

FM: �� 10� MH�

....................................................AM: 530 �� 1710 kH�

AM: 530 �� 1710 kH�

....................................................SW: 2.3 �� 26.1 MH�

Specifications are subject to change and

improvement without notice. Actual product may

vary from the images found in this document.

specifications

RadioShack Corporation.

RadioShack and

RadioShack.com are trademarks
used by

RadioShack Corporation.

To set clock time, complete each step

within 5 seconds, otherwise the radio exits
the clock setting mode automatically.

To view the time while listening to the radio,

press and hold DUAL TIME for 3 seconds. The

time displays for 5 seconds.

1.  Turn off the radio. The clock time shows.
2.  Press MEM/TIME to select a clock time.
3.  As the clock time flashes on the display, press or

hold HOUR + or MIN - to increase the hour or

minute digits within 5 seconds or the radio exits

time setting mode.

4. Press MEM/TIME again or wait for 5 seconds to

save and exit.

5. (Optional) To set an alternate time, press DUAL

TIME. TIME2 displays in the upper left of the

screen. Repeat steps 2 - 4 to set the alternate

time.

setting the clock time

Notes

setting the alarm time

1. Press ALARM.
2. As the alarm time flashes, press or hold HOUR +

or MIN - to adjust the hour or minute.

3. When the desired alarm time appears, wait until

the display stops flashing to save and exit.

setting the alarm mode

1. Press ALARM once or twice. Alarm time with M

(bu��er) or + (radio) flashes.

2. When your desired alarm mode appears, wait

until the display stops flashing to confirm. Clock

time and the alarm mode icon appears.

To cancel the alarm, press ALARM three times until

the alarm icon disappears.
When the alarm sounds, press any key to stop it

for 24 hours. Press SNOOZE to mute the alarm for

about 9 minutes.

To ensure the alarm sounds at the desired
time, make sure the correct clock time
displays.

setting the alarm

Note

You can set a timer to beep later (1 minute to 99

minutes).

1. Press TIMER (radio can be on or off).
2. When 00 appears, press TIMER or MIN - to set

the timer.

3. When the desired settings appears, wait for 5

seconds until the last display appears.

TIMER appears when the timer is activated. To view

the remaining time, press TIMER once.

To cancel the timer, set the timer to 00.

To stop the beeping, press any key.

setting the timer

You can set your radio to play for a certain period of

time (10 to 90 minutes) and turn off automatically.

1. Press SLEEP to turn on your radio if not already

switched on.

2. When 10 and SLEEP appear, press SLEEP

repeatedly to select the sleep timer from 10 to 90

minutes.

SLEEP appears when the sleep timer is activated.

Press SLEEP during the sleep timer to cancel the

sleep timer function. SLEEP disappears.

setting the SLEEP timer

• Dispose of old batteries promptly and properly.
• Do not burn or bury batteries.
• Use only fresh batteries of the required si�e and

recommended type.

• Do not mix batteries of different si�es or chemistries.
• If you do not plan to use your radio for a week

or more, remove the batteries. Batteries can leak
chemicals that can damage electronic parts.

• When

flashes on the display, replace the

batteries.

• Automatic tuning may not work properly if battery

power is low. If this happens, replace the batteries.

battery notes

20-125.indd 2

1/08/2007 11:16:17