Tyco Electronics MM23016 사용자 설명서
MM23016, Rev. C
90
FEATURE
DISPLAY
PARAMETER
SETTINGS
COMMENT
Mute
Menu item: MUTE
ON, OFF
Toggles the mute function ON or OFF to control the
audio output from the selected radio.
audio output from the selected radio.
Mute #1
Menu item: MUTE 1
ON, OFF
Toggles the mute 1 function ON or OFF on radio
#1.
#1.
Mute #2
Menu item: MUTE 2
ON, OFF
Toggles the mute 2 function ON or OFF on radio
#2.
#2.
Multiple radio
operation
operation
Menu item: RADIO
ON, OFF
Toggles the currently selected radio.
Menu item: RADIO 1
ON, OFF
Changes to radio #1.
Radio selection
Menu item: RADIO 2
ON, OFF
Changes to radio #2.
Talkaround
feature
feature
Menu item: TALKARND
Once selected:
TALKARND on line 1
Once selected:
TALKARND on line 1
ON, OFF
Toggles talkaround ON or OFF (transmit frequency
changed to receive frequency).
changed to receive frequency).
Feature
Encryption
Display
Encryption
Display
Menu Item: FEATURES
Once selected:
See Feature Encryption
Display section
Once selected:
See Feature Encryption
Display section
Informational displays only;
no user selectable settings
no user selectable settings
Indicates current features program- med into the
radio as well as certain information required to add
features to the radio (refer to the Table of Contents
for Feature Encryption Display.
radio as well as certain information required to add
features to the radio (refer to the Table of Contents
for Feature Encryption Display.
System Scan
Enable
Enable
Menu Item: SYS SCAN
Once selected: SYSC ON
or SYSC OFF
Once selected: SYSC ON
or SYSC OFF
ON, OFF
System Scan features like ProScan are toggled ON
and OFF.
and OFF.
Type 99 Decode
Enable
Enable
Menu Item: T99 ENAB
Once selected:
T99 ON or T99 OFF
Once selected:
T99 ON or T99 OFF
ON, OFF
Type 99 Decode is toggled ON and OFF.
11.5 GROUP CALLS IN P25 MODE
11.5.1 Transmitting a Group Call
1. Select the desired P25 system.
2. Select the Talk Group/Conventional Channel (selected simultaneously using either the
system/group/channel knob or the group key).
3. Press and hold the PTT.
4. When a grant tone is received (if enabled through programming), speak into the microphone.
5. Release PTT and wait for response.
11.5.2 Receiving a Group Call
The radio will unmute according to the squelch mode defined in the radio personality (monitor, normal,
selective).
selective).
1. Select the desired P25 system and Talk Group/Channel or turn scan on and make sure the desired
channel is in the scan list.
2. When the radio receives a P25 call, the radio will unmute and the channel name will appear in the
display.
3. Press the PTT button to respond.