TEAC SR-80i 사용자 설명서

Connect an external USB flash memory to this port.

This terminal outputs video signal from an iPod/
iPhone connected to the dock of the SR-80i.
Connect the unit to the composite video connector 
of a television or monitor using the supplied RCA (pin) 
video cable.

< When you output video to a TV from your iPod/

iPhone, the video is not displayed on the iPod/
iPhone’s screen.

<  If your iPod/iPhone has “TV OUT” menu, select “On” or 

“Ask”. Or the iPod/iPhone will not output video signal.
When you have set “TV OUT” to “Ask”, each time 
you play a video your iPod prompts you to specify 
whether to output it to a TV.

Connect the supplied AC adapter (PS-M1628) to this 
jack. Then, connect the connector of the power cord 
set to the AC adapter.

 After all other connections are complete, connect 

the power cord's plug to an AC wall socket.

 Use the supplied AC adapter (PS-M1628). Do not 

use any AC adapter other than the one included 
with this unit.

 Be sure to connect the power cord to an AC outlet 

which supplies the correct voltage.

< If you are not going to use the unit for some time, 

disconnect the power cord from the wall socket.

Analog 2-channel audio signal is input from these 
jacks. Connect a portable audio player using the 
supplied RCA pin-stereo mini plug cable.

Make sure to connect:

e  White jack (L: left channel)

e  Red jack (R: right channel)

< When using the headphones jack of the component, 

if you do not adjust its volume, you might not hear 
any sound from SR-80i.

< Turning the volume of the connected component 

up too high might cause the sound from SR-80i to 
be  distorted.  In  this  case,  reduce  the  volume  of  the 
component until the distortion stops and then adjust 
the volume level of SR-80i to a comfortable listening 
level.

Connect the supplied FM antenna. Extend fully and 
position for the best reception and attach it to a 
window frame or wall with thumbtacks or the like.

Connect the supplied AM loop antenna to the AM 
antenna terminal. Place the antenna in the direction 
which gives the best reception.

To stand the loop antenna on a surface, fix the claw to 
the slot in the antenna base.