Uniden PRO630XL 사용자 설명서

13

Push the MIC plug at the end of the microphone into the MIC Jack until the connection locks 

into place. Gently tug the MIC cord to test that the connection is locked. Use the Front MIC Jack 

cover which is threaded onto the MIC cord to seal the MIC Jack entry from dust.     

Pull away the threaded rubber collar and move it down along the cord. Using the flat blade of a 

screwdriver or similar object carefully press the lock tab at the bottom side of the MIC plug and 

push it upwards. At the same time tug on the MIC cord to draw back the MIC plug. 

Use the Rear MIC Jack if the main base is mounted where a Front MIC connection is intrusive 

or if you wish  to use Standard Microphone with the extension cable.

Peel the dust cover from the Rear MIC Jack. Push the MIC plug at the end of the microphone, 

or extension cable if using the extension cable into the MIC Jack until the connection locks into 

place.