UltraViolet Devices UVC 사용자 설명서

 

 

 

Ultra-Lum, Inc. 1480 N. Claremont Blvd. Claremont, Ca. 91711-3538 

www.ultralum.com

 

81-0008-01 REV A  

8

 

 

 

4.1.1 

Clean all exterior surfaces using a mild non-abrasive cleaner such as glass cleaner with soft 
paper towels. 

 

 

4.2.1 

Replacing the lamp(s) requires (1) end panel removal. 

 

4.2.1.1 

Unplug the AC line cord from the wall receptacle. 

4.2.1.2 

Remove the filter glass by unscrewing the (2) screws located on either side of 
the unit. 

4.2.1.3 

Carefully slide the filter glass out of the silver housing. Be careful not to scratch 
the glass filter or place it on a surface that could cause it to fracture or crack. 

4.2.1.4 

The lamps need to be rotated in the socket to remove and replace. To remove 
rotate lamp until the lamps pin entry slot on the lamp socket is vertical. Then lift 
upward to remove. 

4.2.1.5 

When installing the lamps reverse the steps noted above. 

4.2.1.6 

Turn ON the AC Main switch. 

4.2.1.7 

Check to see if all of the lamps have lit. 

Unit does not operate.  

5.1.1.1 

Ensure device is plugged in and has power. 

5.1.1.2 

Ensure that the lamp(s) are properly seated, both pins on each side of the lamp 
should make contact with the metal contact in each connector. 

5.1.1.3 

Replace the lamp. The lamp may have an open filament (there is one in each 
end) or the vacuum may be gone in the lamps glass envelope. 

5.1.1.4 

Contact customer Service for replacement parts. 

 

 

 

5.3.1 Contact 

Information 

 

 Ultra-Lum, 

Inc. 

1480 N. Claremont Blvd. 
Claremont, Ca 91711 
 
Phone .................................. 909-399-3694 
Toll free in USA ................... 800-809-6559  
Fax ...................................... 909-482-0527 
 
Email ...................................

info@ultralum.com

 

Web Site..............................

www.ultralum.com

 

 

 

For software technical support, contact the software manufacturer

.