Dometic 962 사용자 설명서

7

portable toilets are legally acceptable for use in vessels not having permanently installed toilets, as determined by the united 

states Coast Guard.  However, some states and the Canadian province of ontario require a permanently installed portable toilet, 

such as the 964msD and 965msD.

Hold down brackets are provided as standard equipment with marine models or may be purchased separately to secure your rV 

sanipottie

®

 portable toilet in the desired location.  the following instructions are provided as a guideline for your convenience.

 

. position sanipottie

®

 portable toilet in desired location.  make sure of   

 

  adequate clearance for lid and seat in up position and clearance at the  

 

  sides to unlatch and remove top tank.

 

2. open side clasps by pulling outward at top of side clasps.

 

3. place hold down brackets, with mounting holes facing away from toilet,  

 

  under the tank and align with grooves.  see Figure .

 

4. use pencil or awl to mark location of hold down bracket mounting holes.

 

5. remove sanipottie

®

 portable toilet.

6. Attach hold down brackets to the floor or deck with screws provided.

 

7. set sanipottie

®

 portable toilet between brackets and latch in place with side clasps.

Figure 

-/2” Deck waste Fitting

2” Hose Clamp

3/4” Hose Clamp

3/4” Hose Clamp

5/8” Vent Fitting  

(included with sanipottie)

5/8” Vent 

Hose

5/8” thru-hull Vent Fitting 

(installed above water line)

sealand no. 34287 

odorsafe plus  

sanitation Hose

-/2” swivel nut  

(included with sanipottie)

-/2” Gasket  

(included with sanipottie)

-/2” Hose adapter (in-

cluded with sanipottie)

remove Cap From bottom 

tank Vent adapter

Fresh water tank

Holding tank

remove -/2” Cap & plug 

From bottom tank waste 

Discharge adapter