Premier Mounts UFM 사용자 설명서
- 19 -
Make any lateral shift adjustment and lock it by tightening the two (2) ¼”-20 Phillips screws found
on the bottom of the mounting brackets. Use the foot leveler to adjust your plasma.
See figure 16
on the bottom of the mounting brackets. Use the foot leveler to adjust your plasma.
See figure 16
Lateral shift
To remove the display from the wall simply back off the ¼”-20 screws using a Phillips screwdriver and lift the unit
of the wall carefully.
of the wall carefully.
Lateral shift adjustment
Do not over tighten the ¼”-20 screws to the rods.