Peerless Industries ST630 사용자 설명서

ISSUED: 02-05-09   SHEET #: 201-9421-9  06-03-09

Attach screen to tilt assembly (

B). Tighten  

M5 x 6 mm screw (

H) to lock screen to tilt assembly.

Note: For security models, use security driver (I) to 

tighten M5 x 6 mm screws (

H).

To remove screen from mount, loosen screw (

H) 

and lift screen off of mount.

3

•  Do not lift more weight than you can handle. Use ad-

ditional man power or mechanical lifting equipment 

to safely handle placement of the screen.

•  Failure to lock hook plate (

A) with screw (H) can 

cause screen to come off mount if hit accidentally.

•  Do not tighten screws with excessive force. 

Overtightening can cause damage to mount. Tighten 

screws to 20 in. • lb (2.26 N.M.) maximum torque.

Adjust tension knob on right side of mount shown in 

figure 4.1 to desired tension to balance your screen 

size and weight.
Push or pull from top or bottom of screen to adjust 

tilt as shown in figure 4.1. The tilt can be adjusted to 

a maximum of 15° forward or 5° backward.

4

•  Do not tighten screws with excessive force. 

Overtightening can cause damage to mount. Tighten 

screws to 40 in. • lb (4.5 N.M.) maximum torque.

•  Be careful not to pinch fingers when pushing screen 

from the bottom.

TENSION KNOB

SCREEN

© 2009, Peerless Industries, Inc. All rights reserved. 

All other brand and product names are trademarks or registered trademarks of their respective owners.

Peerless Industries, Inc.

3215 W. North Ave.

Melrose Park, IL 60160

www.peerlessmounts.com