Peerless Industries SUAC9000 사용자 설명서
6 of 11
ISSUED: 10-01-10 SHEET #: 095-9354-1
• Be sure to carry display upright, from the top and bottom edges, or damage to display may occur.
WARNING
Assemble upper mounting plate (B) to lower mounting plate (C) using four 8-32 x 1/4" fl at head thread forming
screws (K). Use confi guration as shown in fi gures 3.1 and 3.2.
screws (K). Use confi guration as shown in fi gures 3.1 and 3.2.
3
• Do not assemble mounting plates (B,C) on top of display or damage to display may occur.
WARNING
K
FIG. 3.1
FOR 46" DISPLAYS
FIG. 3.2
FOR 55" DISPLAYS
B
B
C
C
K
Follow instruction manual included with display to remove display from stand.
Set display on a fl at, level surface. Refer to display manufacturer's installation guide for recommended careful
handling. Remove two M4 chrome plated screws from Ultra-Slim wall mount bar. Save all screws. Install eight
standoff screws (included with display) into eight mounting holes on bottom of display.
handling. Remove two M4 chrome plated screws from Ultra-Slim wall mount bar. Save all screws. Install eight
standoff screws (included with display) into eight mounting holes on bottom of display.
2
M5 CHROME SCREWS
STANDOFFS
DISPLAY