ADT Security Services 9600 사용자 설명서

3URJUDPPLQJ

0DVWHU3URJUDPPLQJ/HYHO



8QLPRGH31&

Pressing 2 while viewing Programming Screen #4, will select the Clear Program option.  
This will cause the LCD to display the following screens: 

Pressing 1, for Whole System while viewing the Clear Program Screen #1, will clear all 
general system programming options and all programmed addressable devices from the 
nonvolatile memory of the FACP.  This function is useful when the control panel is first 
installed, prior to autoprogramming.  Note that it is necessary to autoprogram after using 
the Clear Whole System function.

Pressing 2, for All Loops while viewing the Clear Program Screen #1, will clear all 
programming related to all SLC loops and connected addressable devices.

Pressing 3, for Loop 1 while viewing the Clear Program Screen #1, will clear only the 
programming related to SLC Loop 1 and the connected addressable devices.

Pressing 1, for Loop 2 while viewing the Clear Program Screen #2, will clear only the 
programming related to SLC Loop 2 and the connected addressable devices.

Before executing any of the Clear commands listed above, the control panel will provide a 
warning to the user by prompting with the following display: 

Pressing 1 will cause the control panel to carry out the selected clear option.  Pressing 2 
will prevent programming from being cleared. 

    PROGRAMMING
1=PASSWORD CHANGE
2=CLEAR PROGRAM
3=LOAD PROGRAM

Programming Screen #4

@@@CLEAR@PROGRAM

1=WHOLE@SYSTEM

2=ALL@LOOPS

3=LOOP1

@@@CLEAR@PROGRAM

1=LOOP2

@@@@@@WARNING!

@@SYSTEM@CHANGE

@@@@@PROCEED?

1=YES@@@@@@@@@@@2=NO