Marantz NR1402 사용자 설명서
66
Input Mode (Audio)
Default settings are underlined.
The input modes available for selection may vary depending on the input source.
Setting items
Setting details
Input Mode
Set the audio input modes
for the different input
sources.
It is normally recommended
to set the audio input mode
to “Auto”.
Set the audio input modes
for the different input
sources.
It is normally recommended
to set the audio input mode
to “Auto”.
Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
• “HDMI” can be set for input sources for which “HDMI” is assigned at
• “Digital” can be set for input sources for which “DIGITAL” is assigned
).
• If the input source is set to “GAME” or “TV”, it cannot be set to
“Analog”.
• When digital signals are properly input, the
indicator lights on
the display. If the
indicator does not light, check the digital input
connector assignment and the connections.
• If “HDMI Control” is set to “ON” and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is “TV” is fixed to ARC.
input source is “TV” is fixed to ARC.
Decode Mode
Set the audio decode mode
for input source.
Set the audio decode mode
for input source.
BD DVD SAT
GAME AUX TV
Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
• This item can be set for input sources for which “HDMI” or “DIGITAL”
).
• Normally set this mode to “Auto”. Set “PCM” and “DTS” when
inputting the corresponding input signal.
Input Setup
Rename
Change the display name of the selected input source.
Setting items
Setting details
Rename
Change the display name of
the selected input source.
Change the display name of
the selected input source.
• Up to eight characters can be input.
• For character input, see
• For character input, see
Default
The input source name
is returned to the default
setting.
The input source name
is returned to the default
setting.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
No : Do not reset to the defaults.
If you select “Default” and press
ENTER
, the
message “Return settings to the default?”
is displayed. Select “Yes” or “No”, and then
press
is displayed. Select “Yes” or “No”, and then
press
ENTER
.
Source Level (Audio)
Default settings are underlined.
• This function corrects the playback level of the selected input source’s audio input.
• Make this setting if there are differences in the input volume levels between the different sources.
• Make this setting if there are differences in the input volume levels between the different sources.
Setting details
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
).
Basic v
ersion
A
dv
anced v
ersion
Inf
or
or
mation
A
dv
anced v
ersion
BD