Samsung HT-TZ212 사용자 설명서

●

The DVD Home Cinema's remote can be used to control Samsung TVs.

Plug the main unit's power cord into the AC power supply.

Press the 

DVD RECEIVER button to operate the DVD Home 

Cinema.
 

Press the 

FUNCTION button on the main unit or DVD button 

on the remote to enable DVD/CD playback.

Press the 

TV button to set the remote to TV mode.

Press the 

POWER button to turn on your Samsung TV

 with this remote. 

Press the 

TV/VIDEO button to select VIDEO mode 

on your TV. 

before using your home cinema

VIDEO

playback

dB

 Press the 

OPEN/CLOSE (

) button to open the disc tray.

Load a disc.

Place a disc gently into the tray with the disc’s label 

• 

facing up.

Close the compartment by pressing the 

OPEN/CLOSE (

) 

button again.

Playback starts automatically.

• 

To stop playback, press the STOP ( ) button during playback.

 If pressed once, 

• 

PRESS PLAY is displayed and the stop position will be stored in memory.  

 

If the PLAY (

) button or ENTER button is pressed, playback resumes from the stop position. 

(This function works only with DVDs.)
 If pressed twice, 

• 

STOP is displayed, and if the PLAY (

) button is pressed, playback starts from the 

beginning.

 To resume playback, press the 

• 

PLAY (

) button.

 

M

Depending on the content of the disc, the initial screen may appear different.

 



Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : 

 



a copy protection system) recommendations.

Press and hold the Number 7 button on the remote controller for over 5 seconds while the 
power is turned off.

By default, the video format is set to "PAL".

• 

"NTSC" or "PAL" will appear in the display. At this time, press the 

• 

Number 7 button shortly to select between "NTSC" and "PAL".

Each country has a different video format standard. 

• 

For normal playback, the video format of the disc must be the same 

• 

as the video format of your TV.